Why You Should Consider The Gutter Thickness?

It is possible that you have never considered this, but it is very common that when you contact some gutter installers they ask you about the thickness of the channels to be placed. It may seem like an insignificant piece of information. However, if we think about it, we will realize that the thickness of the material has a lot to say about the type of mounting. We tell you why it is important to take the thickness of the gutters into account.

Thicker gutters are more resistant

As with various materials, the thicker the channel is, presumably, the stronger. Although always talking about gutters of the same type. Since, for example, copper gutters of a certain thickness cannot be compared with other galvanized steel ones. Because each material has different characteristics.

For this reason, before doing a new installation, it is necessary to take into account the specific needs to be able to choose a thickness. Usually the assemblers themselves are in charge of making the decision. Although it is recommended that, inform you. On the other hand, if you are going to change the ducts of an old installation, you should never rely on the thickness of the existing ducts, as it may not be enough.

Tips for choosing the correct thickness of rain gutters

In case you are doing the installation of some gutters yourself, you should consider these aspects:

Consider the material. Zinc gutters do not have the same properties as aluminum gutters.

Assess the necessary resistance. But try not to exceed yourself, as it will mean a useless extra cost in the installation.

Adapt to the weather. Get information on the rainfall in the area, both in quantity and type.

Make the pertinent calculations regarding the building. You must take into account the deck surface, as well as the slope of it.

The importance of thickness in ducts made of aluminum

Although the thickness of the ducts must be taken into account for all installations. This data is especially relevant when it comes to an aluminum gutter. This is primarily because not all thicknesses are suitable for making continuous gutter placements. If you are going to make an assembly of this type with aluminum conduits, remember that the thickness must be greater than 0.6m.