How To Repair A Gutter?

To repair a gutter, the first thing to take into account is the material it is made of. In the market, we can find aluminum, zinc, copper, or PVC gutters among other materials. However, those named are the most common materials. This is important since each material requires a specific repair.

Subsequently, no matter what the material is, we will clear the area of ​​dirt and clean it deeply with the help of a steel brush to remove all the remains left by the water; this will help us to see more precisely the area affected by the crack.

While we check the state of the gutters, we must also check their anchor points with the facade of the property, and observe if they deteriorate or are rusty; if so, they will need to be replaced. We will also check if the downspouts have any plugs or jams that need to be removed.

For PVC gutters, a plastic putty is usually used, never silicone, to seal the area, later we can adhere self-adhesive asphalt tape, this is sold in all kinds of finishes for all kinds of gutters. We will dispense with using the asphalt tape by itself, although this can be useful in very small repairs, we will only be able to delay the problem, since an optimal waterproofing of the area will not take place.

In the case of metallic materials, such as aluminium, zinc or copper, we must observe if there is oxidation in the material, and after thorough cleaning with a brush, we will apply an anti-rust product to protect the rest of the gutter from advancing from oxidation. If the rusty area is very large and very deteriorated, it will be necessary to dispense with the repair and opt for the replacement of the part or section of the gutter with a new one.

Once the area is very clean, we can choose to apply special plastic cement for gutters and then cover it with self-adhesive asphalt cloth; or opt for welding, the good thing about welding is that it seals and reinforces the entire section of the gutter, being a much more durable repair. The welding must be done by a professional, with the section of the gutter removed to work in a position that allows the entire area to be perfectly welded. Good welding is essential for these cases, so we recommend that you go to professionals like us; It is also a precision job that requires a lot of experience and is not without danger.

If the break is located in one of the elbows of the gutter, the most appropriate thing will be to replace the piece since it will be easier and will give better results than the repair. Keep in mind that if your gutters are not properly maintained, you will need to repair or even replace them often.

For this reason, it is highly recommended that you entrust the cleaning and maintenance of the gutters to professional companies such as All About Gutters Inc, since this is the only way to ensure that they do not deteriorate to the point of having to replace the entire installation. Count on us also for the installation of gutter systems , we are professionals specialized in working with gutters and drains; If a gutter installation is not properly done following the required regulations, not only will they not drain efficiently, but sooner or later they will have to be replaced.